UW-REG/UW-REB is a wall-mounted reader for RFID proximity cards and transponders from the MIFARE^® Classic, Ultralight, DESFire (ID only), iCLASS (CSN only), ICODE^® SLI(ISO15693) family, operating at a frequency of 13.56MHz, equipped with an Ethernet PoE interface with the Netronix over TCP/IP transmission protocol. It has RTC with battery backup, unique MAC address, built-in antenna, buzzer, relay, and two LED indicators.

NP18-D8B / NP18-D8R is a RFID proximity card reader that supports Unique (EM4102), HITAG1/S, HITAG2, HID ISOProx®II and Q5 cards, and transponders, operating at 125kHz. The reader is equipped with 1-Wire^®, Wiegand and serial UART (CMOS), RS-232-CMOS interfaces. It has been designed in accordance with the requirements of the E-mark automotive safety standard.

NP18-R8B / NP18-R8R is a RFID proximity card reader from the MIFARE^® Classic, Plus, Ultralight, DESFire, ICODE, ISO1443A/B, ISO15693 families operating at 13.56MHz. Additionally, it has the ability to read CSN from iCLASS and LEGIC transponders. The reader is equipped with 1-Wire^®, Wiegand and serial UART (CMOS), RS-232-CMOS interfaces. The reader is compatible with CardIdCoder software. It has been designed in accordance with the requirements of the E-mark automotive safety standard.

NP17-R8B is an RFID reader that supports MIFARE^® Classic transponders, operating at a frequency of 13.56MHz. The reader has 1-Wire^® (Dallas DS1990 emulation) and Wiegand 26 interfaces, which can work as part of an access control system when connected to an appropriate control panel.

NP17-U8B is an RFID reader that supports Unique transponders, operating at a frequency of 125kHz. The reader has 1-Wire^® (Dallas DS1990 emulation) and Wiegand 26 interfaces, which can work as part of an access control system when connected to an appropriate control panel.

PLA-UDK is contactless RFID cards and transponders reader from Unique family, operating on frequency of 125kHz. Reader has 1-Wire^® (Dallas DS1990 emulation) interface with a 1m long cable terminated with a male 2x3 pin type Molex MicroFit3.0 plug. Reader has a built-in antenna and an LED indicator.

MW-R8B / MW-R8G are RFID card reader with support of MIFARE® Classic, Plus, Ultralight C, DESFire, ICODE^® SLI, HID iCLASS (CSN only) family cards and transponders, working on frequency of 13.56MHz. Reader is adapted to work only on metal surfaces.

Bluetooth® RFID reader supporting MIFARE® Classic, DESFire transponders, operating at a frequency of 13.56 MHz.

UW-R4GB is wall mount RFID proximity card and transponders reader from the MIFARE^® Classic, Plus, Ultralight C, DESFire, iCLASS (CSN only), ICODE^® SLI (ISO 15693) families, operating at 13.56MHz frequency, equipped with an RS-485 and Wiegand interfaces. Reader has also built-in antenna, buzzer, relay, two LED indicatiors and RTC clock with battery backup and comunicate over interface via OSDP (the latest standard with data transmission encryption, described in more detail in the article), Modbus RTU or Netronix transmission protocols.

UW-D4GB is wall mount RFID proximity card and transponders reader from the Unique (EM4102), HITAG 1/2/S, HID ISOProx^®II and Q5 families, operating at 125kHz frequency, equipped with an RS-485 interface.

MW-R4B / MW-R4G are RFID card reader with support of MIFARE® Classic, Plus, Ultralight C, DESFire, ICODE^® SLI, HID iCLASS (CSN only) family cards and transponders, working on frequency of 13.56MHz.

UW-RES is wall mount RFID proximity card and transponders reader from the MIFARE^® Classic, Ultralight, DESFire (ID only), iCLASS (CSN only), ICODE^® SLI operating at 13.56MHz, equipped with an Ethernet PoE interface with Netronix over TCP/IP transmission protocol. Reader has also built-in antenna, buzzer, relay and two LED indicatiors.