UW wall mount readers

UW wall mount RFID reader series

UW series wall-mounted RFID readers are a complete proximity identification solution in access control applications. Equipped with a compact and aesthetic housing they have, among others built-in antenna, buzzer, tamper (anti-tamper protection), two LED information diodes and an electromagnetic relay for controlling an electric lock, electric lock or other type of device: turnstile, gate, barrier. Depending on the version, the UW RFID readers support such interfaces as RS485 (also with Modbus RTU protocol), CAN 2.0B or 1-Wire® (Dallas / Maxim DS1990 emulation). It is also possible to use the Ethernet PoE (Power over Ethernet) interface for simultaneous communication of the readers and their power supply.

The UW reader series supports RFID proximity transponders of standards such as Unique (EM4102), HITAG, Q5, HID operating in the low 125kHz frequency band, and MIFARE® Classic, Ultralight, DESFire, ICODE SLI, ICODE-SLI-S and NFC compliant with ISO/IEC 14443, and operating in the 13.56MHz band.

Active filters

Showing 1-12 of 15 item(s)

UW-UDNK / UW-UDNKB is wall mount RFID proximity card and transponders reader from the Unique (EM4102) family operating at 125kHz low frequency, equipped with an 1-Wire interface. Reader has twelve capacitive touch buttons, built-in antenna, buzzer, relay and progammable RGB LED indicatior.

  • New

UW-R4GB is wall mount RFID proximity card and transponders reader from the MIFARE® Classic, Plus, Ultralight C, DESFireiCLASS (CSN only), ICODE® SLI families, operating at 125kHz frequency, equipped with an RS485 interface. Reader has also built-in antenna, buzzer, relay, two LED indicatiors and RTC clock with battery backup and comunicate over interface via Netronix or Modbus RTU protocols.

  • Modbus RTU
  • RTC

UW-MDS is a wall-mounted RFID reader with support of MIFARE® Classic (ISO 14443-3) proximity cards and transponders, operating at 13.56MHz, equipped with a 1-Wire® interface (Dallas DS1990 emulation). The UW-MDS reader is fully compatible with the door controllers used in the NACS - Netronix Access Control System.

UW-UDS is a wall-mounted RFID reader with support of Unique (EM Microelectronic - P4150) proximity cards and transponders, operating at 125kHz, equipped with a 1-Wire® interface (Dallas DS1990 emulation). The UW-UDS reader is fully compatible with the door controllers used in the NACS - Netronix Access Control System.

UW-RES is wall mount RFID proximity card and transponders reader from the MIFARE® Classic, Ultralight, DESFire (ID only)iCLASS (CSN only), ICODE® SLI operating at 13,56MHz, equipped with an Ethernet PoE interface with Netronix over TCP/IP transmission protocol. Reader has also built-in antenna, buzzer, relay and two LED indicatiors.

  • PoE IEEE 802.3af

UW-D4G is wall mount RFID proximity card and transponders reader from the Unique (EM4102), HITAG 1/2/SHID ISOProx®II and Q5 families, operating at 125kHz frequency, equipped with an RS485 interface.

  • Modbus RTU

UW-R4G is wall mount RFID proximity card and transponders reader from the MIFARE® Classic, Plus, Ultralight C, DESFireiCLASS (CSN only), ICODE® SLI families, operating at 125kHz frequency, equipped with an RS485 interface. Reader has also built-in antenna, buzzer, relay, two LED indicatiors and RTC clock with battery backup and comunicate over interface via Netronix or Modbus RTU protocols.

  • Modbus RTU
  • RTC

UW-DNG is wall mount RFID proximity card and transponders reader from the Unique, HITAG, Q5 i HID family operating at 125kHz low frequency, equipped with an CAN 2.0B interface for support NACS - Netronix Access Control System.

UW-MDN is wall mount RFID proximity card and transponders reader from the MIFARE® (ISO14443-3) family operating at 13,56MHz high frequency, equipped with an 1-Wire® interface (Dallas DS1990 emulation).

UW-DAL is wall mount RFID proximity card and transponders reader from the Unique family operating at 125kHz low frequency (EM Microelectronic - P4150), equipped with an 1-Wire® interface (Dallas DS1990 emulation).

UW-M4G / UW-M4R is wall mount RFID proximity card and transponders reader from the MIFARE® Classic, Ultralight, DESFire operating at 13,56MHz high frequency, equipped with an RS485 interface. Reader has also built-in antenna, buzzer, relay and two LED indicatiors.

  • Online only

UW-U4GE is wall mount RFID proximity card and transponders reader from the Unique (EM4102) family operating at 125kHz low frequency, equipped with an RS485 interface. Reader has also built-in antenna, buzzer, relay and two LED indicatiors.

Showing 1-12 of 15 item(s)
Are you looking for custom RFID products?

In addition to the offer of universal modules and RFID readers, which are permanently available in the offer
Netronix provides services of designing RFID devices for individual orders.

Thanks to this, it is possible to closely match the designed RFID device to the specificity of the target application.